R&D Kapazität
Produktzertifizierung
| Bild | Zertifizierungsname | Zertifiziert von | Geschäftsumfang | Verfügbares Datum -- Abgelaufenes Datum | Verifiziert |
|---|---|---|---|---|---|
|
Test Report | TST | Based upon the performed tests by submitted samples, the test results comply with the limits of REACH regulation (EC) No 1907/2006. | 2017-06-16 ~ | |
|
UN38.3 | TCT | Test cells and batteries shall be secured to the testing machine by means of a rigid mount which will support all mounting surfaces of each test battery. Each cell shall be subjected to a half-sine shock of peak acceleration of 150 g n and pulse duration of 6 milliseconds. Alternatively, large cells may be subjected to a half-sine shock of peak acceleration of 50 g n and pulse duration of 11 milliseconds. Each battery shall be subjected to a half-sine shock of peak acceleration depending on the mass of the battery. The pulse duration shall be 6 milliseconds for small batteries and 11 milliseconds for large batteries. The formulas below are provided to calculate the appropriate minimum peak accelerations. Each cell or battery shall be subjected to three shocks in the positive direction and to three shocks in the negative direction in each of three mutually perpendicular mounting positions of the cell or battery for a total of 18 shocks. | 2018-01-09 ~ | |
|
Test Report | Anbotek Testing | As specified by client, according to the Regulation (EC) No 1935/2004, the Commission Regulation (EU) No 10/2011 and Regulation AP(2004)4, to determine the Bisphenol A (BPA) content in the submitted sample. | 2016-12-22 ~ | |
|
RoHS | ATC | The Certificate of Compliance is based on a test procedure or an evaluation of the above-mentioned product. This is to certify that the above-mentioned product is in compliance with the RoHS Directive (2011/65/EU) of the European Parliament on the Restriction of the use of certain Hazardous Substances [Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr 6+ ), Polybrominated biphenyls (PBBs) and Polybrominated diphenyl ethers (PBDEs)] in Electrical and Electronic Equipment. | 2016-11-22 ~ | |
|
CE | HSO | Text is Black or white in color and is left justified. Labels are printed in indelible ink on permanent adhesive backing and shall be affixed at a conspicuous location on the EUT or Silk-screened onto the EUT. | 2019-03-22 ~ | |
|
RoHS | HSO | The total Lead, Cadmium, Mercury, Hexavalent Chromium, Polybrominated Biphenyls and Polybrominated Diphenylethers in the submitted samples comply with the requirement of RoHS Directive 2011/65/EU, and its amendment directives. | 2019-03-22 ~ | |
|
CE | Shenzhen HSO. Test Technology Co., Ltd. | The EUT described above has been tested by us with the listed standards and found in compliance with the council EMC Directive 2014/30/EU. It is possible to use CE marking to demonstrate the compliance with this EMC Directive. | 2019-08-22 ~ | |
|
ROHS | HSO | The total Lead, Cadmium, Mercury, Hexavalent Chromium, Polybrominated Biphenyls and Polybrominated Diphenylethers in the submitted samples comply with the requirement of RoHS Directive 2011/65/EU, and its amendment directives. | 2019-03-22 ~ | |
|
CE | HSO | Text is Black or white in color and is left justified. Labels are printed in indelible ink on permanent adhesive backing and shall be affixed at a conspicuous location on the EUT or Silk-screened onto the EUT | 2019-03-22 ~ |
Forschung & Entwicklung
There is/are 5 - 10 People R&D Engineer(s) in the company.
E-Mail an diesen Lieferanten
